Xecuter JR-Programmer v2
incl. 19 % USt zzgl. Versandkosten
Lieferzeit Derzeit nicht lieferbar
Xecuter JR-Programmer v2
NEW VERSION 2 with Full POST Monitoring and CR3 Pro RATER Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !)
The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI PIC based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 !
Complete with a CR JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 286). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install. Also includes the CR3 Pro RATER POST Monitoring Cable.
The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode.
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
RED LED FLASHING: R/W Activity & POST Activity (Switch to the right)
- Fast NAND Programming
- Fast XILINX CR JTAG Programming
- Compatible with all CoolRunners inc the new CR3 Pro
- Supports Full Post Monitoring
- Compatible with both Phat and Slim
- Onboard LED's indicate Power & Data
- Easy Install System
- Compatible with All NAND-X QSB's
- Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately)
- Includes Cable For Xilinx CRJTAG
- Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately - Trinity Kit or Corona Kit)
- Includes KIOSK option for Remote On
- Built-in Programmer For Future Firmware Upgrades
- Designed for the latest J-Runner App (Build 286+)
- Rock Solid Design – Tested by the J-Runner Team
- Supports New QSB V3 Kits (Solder Separately)
- Supports Sonus 360 Programming
- Affordable – We Provide You With More For Less !
- High Quality & Trusted TX Design
What's In The Kit:
- JR Programmer v2
- NAND Cable Set (Can fit to QSB's or cut use as wires install)
- CR JTAG Cable Set
- CR3 Pro RATER POST Monitoring Cable
- Zu diesem Artikel existieren noch keine Bewertungen